Download, Install or Access CTI Navigator

There are three (3) ways MLS members can use CTI Navigator for your MLS:

  1. DESKTOP - Click here to install the CTI Navigator Desktop program on a computer running Windows (see RT exception below). The default installation is set to access all MLS data over the Internet (no need to download or update data on your computer).

    To install or update MLS Data in CTI Navigator Desktop, so it can run without the Internet when necessary, click here (or click here to go to the Install Data Index).

  2. WEB - Click here for the Internet address where you can run CTI Navigator Web for your MLS in a plug-in compatible Internet browser on a Windows* or Mac computer - no CTI installation necessary. 
  3. MOBILE - Click here for CTI Navigator's private website address for your MLS where you can sign-in from any Internet enabled Mobile device (such as a tablet or smartphone) - no App necessary. 

*Windows RT note. CTI Navigator Desktop and CTI Navigator Web will run in all current versions of Windows, including Windows 8.1, except Windows RT. Windows RT will only run apps written specifically for RT, and approved and distributed by Microsoft through its online Windows Store. Windows RT also does not allow plug-ins (such as Silverlight) to be added to its browser, nor does it allow any other plug-in compatible browser to be installed. To access and use MLS information, Windows RT device users can go to CTI's special website for Mobile devices  (option 3 above). 

Only CTI licensed MLS members may download the CTI Navigator program or MLS specific information (which is encrypted), or access CTI Navigator MLS websites (which are password protected). Each version of CTI Navigator is customized for a specific MLS. For assistance, MLS members can contact Creative Technology's Tech Support (phone 1-800-533-1031 weekdays from 8:00 am - 6:30 pm EST). Doing other than as instructed can corrupt your CTI Navigator program or data and require re-installation (see disclaimer below).  


Main Index: To go directly to a Topic of Interest, click on that topic in the index below: 

Note: You can click on any link on this web page to go directly to the referenced information.



Install the CTI Navigator Desktop PROGRAM

Install Program Index:

For a new installation, always install the program first. Most users only need to install the program (not the data or taxes).  The default setting for the program is to access MLS data as needed over the Internet. 

To Install the CTI Navigator Desktop Program from the Internet 

If CTI Navigator Desktop has been installed previously on this computer, see "old version warning" below. Otherwise, follow the steps below.  

  1. To install CTI Navigator Desktop in any current version of Windows (32-bit or 64-bit), click on the link below appropriate for your MLS. (If you do not know the 3-letter code for your local MLS, click here.)  
    CTI Navigator Program for HLN  
    CTI Navigator Program for HWS 
    CTI Navigator Program for NAS
    CTI Navigator Program for NEG 
    CTI Navigator Program for NFL
  2. On the file Download screen, select Run when prompted by your browser. (If you prefer, you can Save the "{MLS}Setup.exe" file and Run it later.) 
  3. Follow the on-screen instructions. 

View Photos Note:  If only the program for CTI Navigator Desktop is installed (which is the normal default), listing photos will not be available to copy from inside your computer until you first preview an MLS report that displays the photos, or you use the export function from a data table. 

Find Your MLS code

To download, install or access the version of CTI Navigator that is appropriate for your local MLS, you need to know the 3-letter code for your MLS. Current MLS codes are HLN, HWS, NAS, NEG, NFL. Only active members of the local MLS can use the version of CTI Navigator that is customized for their MLS. If you do not know you MLS code, it can be determined by contacting your local MLS office or by contacting CTI (see "Contact CTI Technical Support" on CTI's Help and Tutorials website).  

Also, you can see this 3-letter code on any computer which has CTI Navigator Desktop for your MLS already installed.  Just open the CTI Navigator Desktop login screen and click on its Setup button. The first 3 letters in the Internet Server Address box ({MLS}.ctimls.com) are the code for your MLS. Substitute these three letters wherever {MLS}  is indicated on this web page. 

 ▲ Return to Main Index of Topics ▲    

▲ Back to the Top of this web page ▲

Old Version Warning. If you already have an old version of CTI Navigator Desktop on your computer (installed before April 19, 2012), you should uninstall the old installation before installing any new version of CTI Navigator. This applies whether you are reinstalling CTI Navigator for the same MLS, or for a new or additional MLS.  

DATA: If you want to install the optional data, you can click here to start the data download process immediately. Installed data must be kept up-to-date by updating regularly. For download instructions and detail information, click or scroll down to the Install Data Option section of this web page.  

Once installed, the program will automatically keep itself up-to-date when you either log into CTI Navigator or, if you installed data, when you Update. 

Note 1: In all 32-bit  versions of Windows, CTI Navigator's program files are installed in the " \Program Files\" folder. In all 64-bit  versions of Windows, CTI Navigator's program files are installed in the " \Program Files (x86)\"  folder. 

Note 2: After installation, if a program update fails, the CTI Navigator screen may close but leave the "CTI Navigator.exe" program component still open/running. Therefore, if a program update fails, open Windows Task Manager (right-click on the Windows task bar at the bottom of the screen and select "Task Manager"), select any CTI Navigator.exe file(s) listed, click the "End Process" button, then login/update again. Alternatively, you can re-start Windows to automatically close all open processes and also re-start the CTIUpdateService

    ▲ Return to Main Index of Topics ▲ 

Install the Program and/or Data from Disk

See "old version warning" above if CTI Navigator Desktop has been installed previously on this computer. 

To install from disk(s)

Repair CTI Update Service: Click here to save and then run a program to repair the new CTI Update Service used by new installations. Do not run this repair utility unless CTI Navigator has already been installed successfully. 

Previous (Older) Installations of CTI Navigator Program

Installations before April 17, 2012 placed all program, data and user CTI Navigator files in the "\Program Files\" folder (or in the "\Program Files (x86)\" folder in 64-bit Windows). 

If your CTI Navigator program was installed in Windows 7 or Windows Vista before April 17, 2012, you should verify that CTI Navigator was granted "administrative privileges" when it was installed in Windows. To do so, open Windows Explorer > browse to C:\Program Files\CTI Navigator\ (or, in a 64-bit version of Windows, to C:\Program Files (x86)\CTI Navigator\) > right-click on CTI Navigator.exe > select Properties > click the Compatibility tab > under Privilege Level, check "Run this program as an Administrator" > click Apply > click "Show/Change Settings for All Users" button (if this button is displayed) and in Privilege Level under the "Compatibility for All Users" tab, check "Run this program as an Administrator" > click OK. 

Use the same steps as above to also verify that administrative privileges were granted for the CTIUpdateManager.exe file in the CTI Navigator folder (right-click on CTIUpdateManager.exe > select Properties > click the Compatibility tab > under Privilege Level, check "Run this program as an Administrator" > click Apply or OK).  [Note: "Run this program as an Administrator" is grayed out (not selectable) if User Account Control (UAC) in Windows is disabled.]

When installed prior to April 17, 2012, if CTI Navigator and CTI's Update Manager are not set to "Run as Administrator", the User Account Control feature of Windows 7/Vista may send CTI Navigator updates (such as new data and photos) and outputs (such as e-mail or printing) to the Virtual Store in Windows instead of into the correct CTI Navigator folders. This also prevents the program from keeping itself up-to-date. You can read about Windows' User Account Control and the Virtual Store in "Use Windows Vista and Windows 7" on CTI's Help and Support website

Note 3: CTI Navigator's program files installed after April 16 should not be assigned Administrative Privileges in Windows 8, 7 or Vista. That is because CTI's new installation process (from disk or from the Internet as described above) installs an "Update Service" in the Windows System to handle all program changes for CTI Navigator. 

When you run CTI Navigator, always click "Allow" at any security prompt. Note that some firewalls may need to be set specifically to allow CTI Navigator and CTI's Update Manager to always access the Internet. (For instructions, see Configure Security for common security programs on CTI's Help and Tutorials website.)

    ▲ Return to Main Index of Topics ▲  

▲ Back to the Top of this web page ▲

Install DATA Option in CTI Navigator Desktop

Install Data Index:

   ▲ Return to Main Index of Topics (at the Top of this web page) ▲ 

Installing MLS data into the CTI Navigator Desktop program on your computer is completely optional. Most users run the program set to access data over the Internet (its default setting) rather than install data that must be kept up-to-date. However, if you sometimes need to run the full CTI Navigator Desktop when the Internet is not available (such as on a laptop or ultrabook which may not always have an Internet connection), you have the option to install MLS listing data onto your computer. 

To install all MLS data (without photos), ensure that your computer has at least 500 MB of storage space available. To install all MLS data and all MLS photos, ensure that your computer has at least 8 GB of storage space available. 

Download DATA. To install MLS data, and tax data where available, click here and Run the CTIDataLoader.exe file (or you can Save and then Run this file). The Data Loader will automatically detect which MLS Navigator program is installed. This will open a screen similar to the following (but with a "Data path" appropriate for your version of Windows and your MLS):

Data file downloader 

Check "MLS Data" on the Downloader screen , and also check "Tax Data" if available. Then click the Download button. 

Taxes Note.  If your MLS includes taxes, both MLS data and Tax Data must be installed for CTI Navigator to be able to run when your computer does not have an Internet connection. 

Multi-MLS Note.  If you use CTI Navigator for multiple MLS organizations, the Downloader will automatically download  data for the last MLS selected in CTI Navigator on your computer. To download data for a different MLS: close the data downloader, open CTI Navigator's login screen, select the desired MLS, close CTI Navigator's login screen, and then run CTIDataLoader.exe again.

If you already have data installed on your computer (which you may want to replace if it is out-of-date or corrupted), you will see a "DynaZip UnZip Warning" requesting whether or not to overwrite the existing file(s). Click Yes (or "Yes to All") to overwrite (replace) the existing data file(s) with the new data file(s). This warning screen will disappear while the existing file(s) is being replaced (which  may take a few minutes). 

   

When you see "Download Complete", then click OK. This will close the data downloader screen. Downloading the data will automatically set CTI Navigator Desktop to use that data when you log in. 

MLS Data files for download are updated approximately every other week. 

Photos Note. The MLS Data file does NOT include photos. Because photo files do not compress effectively and there can be up to 24 photos per listing, it is not practical for most users to download all photos for all current listings over the Internet (see "All Photos" below). However, new photos will automatically download the next time you update CTI Navigator after installing new data.

After downloading data, click the Update button instead of the OK button each time you log into CTI Navigator. This will run the CTI Update Manager to ensure that Navigator is using reasonably current information. 

  

Anytime you want to update inside Navigator you can click on the update icon Update icon (or select File > Update in the toolbar). You also can run the CTI Update Manager without logging in by selecting Start > all Programs > CTI Navigator > Update Manager > Update button. 

"Too Old..." Note: Anytime the MLS data on your computer is too old to update automatically, just download the appropriate data (and taxes where available) as described above. You do not need to reinstall the program just to update the installed data.

Photo Download Warning: unless you disabled downloading new photos (as described above), the first update after downloading new data from the Internet can take a fairly long time. This is because the Update Manager will automatically download up to 24 photos for each new listing. After your initial update, select Compact Listing Data (at the Compact prompt, or under Tools > Compact Listing Data) when you open CTI Navigator. Wait for compacting to complete before you start another function in Navigator. 

If a CTI Navigator data update stops and displays "Updating Photos" in the same window underneath Status, one or more photos may be locked as "Read Only". To clear any read only locks on MLS photos, click on or go to http://ctimls.com/Downloads/ClearReadOnlyPhoto.exe, and Run (or Save and then Run) the ClearReadOnlyPhoto.exe file. This will open a screen similar to the following (but with a "Path" appropriate for your version of Windows and your MLS): 

 

Click the Start button to run the "Clear Read Only..." utility. When "Update Complete" displays below the Start button, click the Exit button to close this screen. If the error persists or other errors occur, click on Update Problems at CTI's "Instructions to Fix Errors..." web page. 

▲ Back to Install Data Index

    ▲ Return to Main Index of Topics ▲

▲ Back to the Top of this web page ▲

Adding Another MLS to an Older MLS Installation in CTI Navigator Desktop

Installations of CTI Navigator after April 17, 2012 store MLS User information and data in a different location than installations prior to April 17, 2012. Consequently, to install CTI Navigator for a different MLS on a computer that already had Navigator installed prior to April 17 would require that you either move the MLS User and Data files from the old installation to the same location as the new MLS/User data installation (see above); or un-install CTI Navigator for the original MLS installation and re-install it using the new installer. If you have saved customized items in CTI Navigator (such as searches, screen layouts, CMA's, and/or flyers) that you want to continue to use, you probably will want to move your old User files to the new location. Otherwise, it is simpler to uninstall and re-install CTI Navigator Desktop for the original MLS using CTI's new installer

MLS Data Location

The path to where your MLS Data is installed on your computer depends on when you installed the CTI Navigator Desktop program, and into which version of Windows it was installed. 

▲ Back to Install Data Index    or     ▲ Return to Main Index of Topics ▲

User Information Location. The first time you log in, CTI Navigator Desktop creates a folder on your computer in its "Users" directory with your MLS login name at  "\CTI Navigator\{YourMLScode}\Users\{YourAgentName}\". [For YourMLScode, see Find Your MLS Code above; for YourAgentName see note 1 below.]

To copy/move just your personal User information (such as saved searches, CMA's, custom flyers, and screen/table layouts) from an older installation to the appropriate location in a new installation:

  1. Open Windows Explorer ("File Explorer" in Windows 8), and browse  
    • in all 32-bit Windows to  C:\Program Files\CTI Navigator\{YourMLScode}\Users\{YourAgentName}\
    • in all 64-bit Windows to  C:\Program Files (x86)\CTI Navigator\{YourMLScode}\Users\{YourAgentName}\
  2. Highlight and copy the "{YourAgentName}" folder 
  3. Browse 
    • in Windows 8/7/Vista (both 32-bit and 64-bit) to  C:\Program Data\CTI Navigator\{YourMLScode}\Users\
    • in Windows XP to either C:\Documents and Settings\All Users\Application Data\CTI Navigator\{YourMLScode}\Users or  C:\Documents and Settings\All Users.Windows\Application Data\CTI Navigator\{YourMLScode}\Users\ .  
  4. Highlight the "\Users\" folder and Paste [replacing the existing "YourAgentName" folder].

After logging into CTI Navigator and confirming that your user information copied successfully, you can delete the original installation files. 

▲ Back to Install Data Index    or     ▲ Return to Main Index of Topics ▲

To copy/move your User information and all MLS Data (including photos) from an older installation to the appropriate location in a new installation:

  1. Open Windows Explorer, and browse  
    • in all 32-bit Windows to  C:\Program Files\CTI Navigator\{YourMLScode}\
    • in all 64-bit Windows to  C:\Program Files (x86)\CTI Navigator\{YourMLScode}\
  2. Highlight and copy the "\{YourMLScode}\" folder 
  3. Browse  
    • in Windows 8/7/Vista (both 32-bit and 64-bit) to  C:\Program Data\CTI Navigator\ 
    • in Windows XP to either C:\Documents and Settings\All Users\Application Data\CTI Navigator\  or  C:\Documents and Settings\All Users.Windows\Application Data\CTI Navigator\ .  
  4. Highlight the "\CTI Navigator\"  folder and Paste [replacing the existing folder for "YourMLScode" and all subfolders].

Warning. Copying (or moving) all the MLS Data and photos will require several minutes. Also, if the old installation of CTI Navigator was set to use local data, the path to the Data Files would need to be changed in the CTI Navigator Setup on the login page to the new location. 

Note 1: Where instructions refer to {YourAgentName}, substitute your name as it is spelled by your local MLS. Agent Names are displayed in CTI Navigator Desktop in the Roster

▲ Back to Install Data Index

Set Data to Internet option

If you already have both the program and data installed correctly, you later can set the program to access MLS data over the Internet (instead of data stored internally). This may be useful for example, if you upgrade your Internet service to broadband (such as to cable or fiber-optic), or if there is a problem with the MLS data (see "Fix Error Messages" in related articles below) or storage space on your computer, or if you want the convenience of not needing to update MLS data in your computer. You do not need to re-install the program. To set CTI Navigator to always access MLS data over the Internet, open the CTI Navigator login screen > click the Setup button > under the Data Files tab (and, where available, under the Tax Files tab), click the button in front of "Internet" (which also un-selects "This Computer") > click the OK button. (The Internet setting is not recommended for any laptop or computer that does not always have Internet access because without an Internet connection you would not be able to sign in or use Navigator.) 

If you install (or change setup to use) only the program, there is no Update button on the login screen. This is because when running only the program, it must access MLS data (including verifying your login password) from CTI over the Internet (instead of inside your computer). Therefore, when only the program is installed (or selected in Setup), CTI Navigator cannot run without access to the Internet. 

If you get a server error after setting CTI Navigator to use MLS data over the Internet, see the related article, "Fix Remote Server does not exist or is unavailable". For other update issues see "Fix Update Problems" in related articles below.

Reclaim Used Hard Drive Space

If you previously installed MLS data but now have switched to set CTI Navigator to access data over the Internet (see preceding section), you can remove the old data and photo files so their storage space can be reused on your hard drive as follows:

  1. Open Windows Explorer (not the Internet Explorer) and browse to the location where CTI Navigator MLS Data is installed for your MLS. 
  2. Under the folder for your MLS, select the Data folder and delete the Mls.mdb file in this folder. Be careful to delete only this one file which has only one capital letter and only one "s" (i.e., do not delete MLS.mdw, Mlss.mdb, or Dic.mdb). 
  3. Under the folder for your MLS, select the Photo folder . Then
    1. Right-click on and Rename the Photos folder (such as to PhotosX)
    2. Left-click on the folder for {YourMLScode} (above the PhotosX folder) to select it. Then 
      1. in the top menu of Windows Explorer, select File > New Folder
      2. type the word Photos and press the Enter key. Be sure this Photos folder is at the first level of indentation under the folder for {YourMLScode}. (It should be directly above and aligned with the PhotosX folder.)
    3. Left-click on the PhotoX folder. Then copy the two files named MLSPhotoA.jpg and "No Photo Available.jpg" from the  PhotoX folder and paste them into the Photos folder that you created in the previous step. 
  4. Minimize the Windows Explorer screen.
  5. Log into CTI Navigator and preview any Report that includes photos for any listing. If viewing Reports successfully displays the photos for the listing, open the Windows Explorer (click where you minimized it to the taskbar at the bottom of the screen) and delete the PhotosX folder. Be careful to delete the old folder that you re-named earlier, not the Photos folder that you created with only two files in it. 

▲ Back to Install Data Index

    ▲ Return to Main Index of Topics ▲

▲ Back to the Top of this web page ▲

Browser Based CTI Navigator

CTI Navigator Web

The browser based version of CTI Navigator does not require you to install any CTI Navigator code. Just go to the Internet website for your MLS (see list below), and sign-in with your 6-character agent code and password for CTI Navigator. 

To use the full featured CTI Navigator Web on any Windows or Apple Mac computer running any major plug-in compatible browser (such as Internet Explorer, Firefox, Chrome, or Safari), go to or select the CTI Navigator Web address below  appropriate for your MLS. (You can only sign into the website customized for the MLS to which you belong. If you do not know the 3-letter code for your local MLS, click here.)  

MLS CTI Navigator Web address Alternate Web address
SAR http://SarWeb.ctimls.com http://SarasotaMLS.com
HLN  http://HlnWeb.ctimls.com http://myHeartlandMLS.com
HWS  http://HwsWeb.ctimls.com http://HwsMLS.com
NAS http://NasWeb.ctimls.com  http://aincMLS.com
NEG  http://NegWeb.ctimls.com  http://NegaMLS.com
NFL http://NflWeb.ctimls.com  http://NorthFloridaMLS.com

If your computer browser does not already have Microsoft's Silverlight plug-in (to support graphics rich Internet programs such as CTI Navigator Web), you will be prompted to install Silverlight before you can sign into CTI Navigator Web. This plug-in enhances your browser's capabilities to support graphics rich business applications such as CTI Navigator Web, and is not specific to CTI Navigator. 

RT Browser Note. Windows RT tablets (such as Microsoft's Surface RT) do not support or allow browser plug-ins (such as Silverlight), and therefore cannot run the full featured CTI Navigator Web. Windows RT tablet users can use CTI’s special website for mobile devices.

Video tutorials are available inside CTI Navigator Web by selecting Help, or on CTI's Help and Tutorials website by selecting Tutorial Videos for Internet browser-based CTI Navigator Web. CTI's Help and Tutorials website also includes many tech tips for using specific and advanced functions in CTI Navigator Web. 

CTI Navigator Mobile

On iPad and Android tablets, iPhones and SmartPhones, Chromebooks, or Windows RT tablets go to or select the CTI Navigator Mobile website for mobile devices (shown below) that is appropriate for your MLS. The Mobile website address is the 3-letter code specific for Your MLS followed by ".ctimls.mobi". For example, the Sarasota MLS website for CTI Navigator Mobile would be http://SAR.ctimls.Mobi . 

You can click on the address beside your MLS below to go to its website for mobile devices. You can only sign into the website customized specifically for your MLS. If you do not know the 3-letter code for your local MLS, click here

MLS CTI Navigator Mobile address
SAR http://Sar.ctimls.Mobi
HLN  http://Hln.ctimls.Mobi 
HWS  http://Hws.ctimls.Mobi 
NAS http://Nas.ctimls.Mobi 
NEG  http://Neg.ctimls.Mobi 
NFL http://Nfl.ctimls.Mobi 

Mobi Note 1: MLS information displayed at the mobi websites is condensed and specially formatted to fit the smaller screens and lower processing power typical of wireless mobile devices. For assistance using Navigator functions at the mobi website for your MLS, contact Dean at CTI Tech Support (800-533-1031) weekday afternoons.

Mobi Note 2:  Currently, new information (such as add or revise a listing, saved search, or CMA) cannot be directly uploaded from a mobile device into the MLS server through the mobi website. Click here for instructions on how to use a Remote Desktop app on your mobile device and desktop computer to indirectly upload information to the MLS server.

See CTI Navigator Mobile for more information on using CTI Navigator at the mobile device website. 

     ▲ Return to Main Index of Topics ▲

▲ Back to the Top of this web page ▲

CTI Navigator on Apple Mac

CTI Navigator Desktop is written in Microsoft code for the Windows operating system (OS). Apple uses an entirely different computer code for the Mac OS and another code for the iPhone/iPad OS. Even though the iMac and MacBook use Intel processors, they still use an Apple operating system which does not run Microsoft's Windows code natively. However, CTI Navigator Desktop can be installed on newer Apple Mac computers that run Windows (directly, virtualized or through a Windows emulator), depending on what processor and which version of Apple's operating system is on the Mac computer. (Also see alternatives below.) 

  1. Apple Boot Camp. If you have a Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor, you can upgrade your operating system (OS) from Apple  to the latest version of Mac OS X (version 10.5 Leopard or higher is required). Then use Apple's Boot Camp assistant (which is included in the OS X Utilities folder) to install Windows (XP through Windows 8 purchased separately) to run in a special partition on your computer's hard drive. Windows applications can then run using the Windows OS and Windows drivers in this partition. This dual-boot option from Apple runs Windows applications on a wide variety of Macs, but it requires you to re-start your computer to switch between Mac and Windows OS. See the "Windows on a Mac" video tutorial (in the related articles below) for Apple's description of how to run Windows and Windows applications on your Mac (using Boot Camp or virtualization).
  2. Virtualization Software. If your Mac uses an Intel processor (such as MacBook, MacBook Pro, 2006 or later iMac, Mac mini with IR sensor, or Mac Pro) running Mac OS X Tiger 10.4 or higher, you can install a virtualization program to create a  "Virtual Machine" that can run Windows inside your Mac OS.  Windows apps can then run side-by-side with Mac apps. You can download a free-for-personal-use version of Oracle's VirtualBox (see "VirtualBox.org Resource Links" in the related articles below); or you can purchase a more feature-rich commercial program such as "VMware Fusion™ for Mac" from VMware, or "Parallels Desktop for Mac" from Parallels, Inc. (see "VM Fusion for Mac" and "Parallels Desktop for Mac" in the related articles below). For a comparison of these virtualization programs see "Mac Virtualization Update"  and  "The Best Way to Run Windows on Your Mac" (in the related articles below). These virtualization programs support multiple versions of Windows (XP through 8) as well as Linux, and do not require re-booting to switch between Mac and Windows OS environments. These programs also can run within a Boot Camp partition and can share files between Mac and Windows applications. Note that running both Mac and Windows OS at the same time requires a minimum of 1 GB or more of memory in your Mac. These virtualization programs will not run on any PowerPC Mac. 
  3. Emulation Software. If your Mac uses the PowerPC G5 processor (older models), you may be able to purchase a copy of a program called "Virtual PC for Mac" to emulate Windows (XP) on a Mac (see the related article below, "Microsoft Virtual PC for Mac"). Emulation software tends to run slower than other approaches, but you do not need to purchase a separate copy of Windows and do not need to choose between operating systems when starting you computer. "Virtual PC 7" will not run on Intel-based Macs. 

After Windows is installed through Boot Camp, Virtualization or Emulation, and Windows is running and updating successfully on your Mac computer, then follow the appropriate steps to install CTI Navigator Desktop into the version of Windows running on your Mac (described previously on this webpage). 

Any questions regarding installing and running Windows applications (such as CTI Navigator) on a Mac should be directed to the appropriate software provider that you are using to run Windows applications on the Mac (such as Apple, Microsoft, Oracle, VMware, or Parallels). CTI does not support Mac based issues.

    ▲ Return to Main Index of Topics ▲

Alternatives to Installing CTI Navigator Program on Apple Devices

You do not have to install the CTI Navigator Desktop program on Apple (and other) devices to use MLS information provided through CTI. You also can:

CTI Navigator Web Alternative. Rather than run Windows on your Mac so you can install CTI Navigator Desktop, you may instead just run the browser-based version of CTI Navigator Web. CTI Navigator Web does not require Windows, and does not itself need to install any MLS program or data files on your computer. It only requires that your computer's browser support the free Silverlight plug-in without restrictions. CTI Navigator Web can run on any Intel-based Mac computer using Apple OS X 10.4.11 or later, and a current full (plug-in compatible) version of the Safari or Firefox browser. 

See "CTI Navigator Web" above for the website appropriate for your MLS. For more information on using the browser-based CTI Navigator Web, see "Tutorials for Browser-based CTI Navigator Web" on the CTI Help and Support Menu in the related articles below.

Mobile Device Website Alternative.  Apple iPads and iPhones, (and Android smart phones and tablets) currently are not able to run either full-featured CTI Navigator program (Desktop or Web). However, you still can access and use MLS data on such devices by going to CTI's website for mobile devices.  You do not need to install anything to access MLS information at CTI's mobile device website. 

See "CTI Navigator Mobile" above for the mobile device website appropriate for your MLS. Read about the many features available at CTI's mobile device website (which includes Hot Sheet, full search with details and photos, mapping with directions and auto-find similar properties, and email with buyer report) by clicking here or by selecting "CTI Navigator for Mobile Devices (such as Tablet, Laptop-tablet Hybrid, Smartphones)" in the related articles below.  

    ▲ Return to Main Index of Topics ▲

▲ Back to the Top of this web page ▲


Disclaimer of Warranty: All services are provided under the terms and conditions of CTI's license agreement accompanying CTI Navigator. Assistance in any form is provided only as a convenience to licensed users of CTI products. Problems and solutions may depend on the nature of your system environment and other parameters that are unknown to CTI. By using information on this website or by requesting assistance, you agree that actions and solutions described, suggested or implemented herein or by CTI staff are entirely at your own risk and are provided without warranties of any kind. It is up to you to take precautions to ensure that information, data and software that your download or otherwise select for your use is free of viruses and other destructive items. Under no circumstances, including negligence, shall CTI or any of its employees be liable for any direct indirect, incidental, special, punitive, consequential or other damages, loss, cost or liability whatsoever that  result from or are related to use of information or technical support provided by CTI. If you do not wish to be bound by these Terms of Use, please do not access or use any part of this website, its contents, links, or information provided by CTI.

Related articles and Internet links: 


▲ Back to the Top of this web page ▲    

To return to CTI's on-line menu of Help & Tutorials for CTI Navigator, click here (or use the back arrow at the top of your Internet browser if you started from the Help & Tutorials menu). 

To go directly to CTI's menu of Instructions to Fix Errors, click here.

 

{Rev. 11.10.2014}